EnemaPro User Guide

Simple, Safe, and Effective Use Instructions

Welcome to your EnemaPro! This guide provides clear, step-by-step instructions to ensure you get the most effective and comfortable experience with your EnemaPro Automatic Enema Pump. Whether you’re using it for gentle, targeted relief or deeper colonic cleansing, this manual will guide you through safe setup, usage, and maintenance for optimal results.

Step 1

Ensure the EnemaPro is fully
charged before use for optimal
performance.

Step 2

Unscrew and remove the water tank and base cover by turning them anti-clockwise. This allows access to the machine for setup and cleaning.

Step 3

Fill the water tank with clean,
filtered, lukewarm water up to the 200ml max line. Do not overfill.

Step 4

Pull out the pump extension (blue tip
located at the base of the
EnemaPro), then attach the water
tank to the base by turning it
clockwise until securely fastened.

Step 5

Connect the silicone nozzle or tube to the plastic connector, then attach it securely to the top of the EnemaPro.

Step 6

Press the mode button to choose Low, Pulse, or High water flow for your comfort.

Step 7

For safe entry, apply a water-based lubricant to the nozzle. Gently insert the nozzle 1-2 cm into the rectum, then press the power button to begin. You may repeat the process as needed for thorough colonic irrigation.

Step 8

After use, remove the nozzle or tube by pushing the release button located below the nozzle. Clean with a chemical-free detergent at the end of each use. Store nozzle on the side of the machine. Push the pump extension back in then screw the water tank and base cover back on in a clockwise direction to keep the EnemaPro sanitary between uses.